How to paint over existing tiles
When you’re ready to remodel your bathroom, you need not remove the tiles old, if you are thinking of saving money. With the right tools and a good knowledge base, you can. A few good tips will help make the job easier when you paint on the tiles or existing tiles.
Selecting paint and supplies
Compare different types of paint Suggested tiles or ceramic tiles and the recommended way to implement them.
Choose the correct apply primer if necessary; Many types of latex paint require a primer base. A painting oil-based or alkyd may not need it. Be sure to read the manufacturer’s instructions. One of the best types of paint for tiles is the nail apparatus type epoxy; is tough and durable and you can buy it in aerosol cans.
Buy the paint and the elements; do not forget to get masking tape, rags, gloves and mask. Decide whether you will use aerosol cans or spray gun; if not, you will also need to buy foam brushes and rollers.
Clean the tiles of the bathroom with a mixture of vinegar and ammonia to remove the waste accumulated soap. Rinse well and let dry, repeat the cleaning and rinsing if they have been traces of soap. For waste difficult, you can buy trisodium phosphate in a paint but be sure to follow the manufacturer’s instructions carefully.
Lightly sanding tiles , just enough to spend a little. This will help the primer and paint adhere to the tile . Vacuum and clean to remove excess sanding dust.
Fill the joints if the caulk around the tub and clean is necessary.
Remove any device that can be unscrewed from the tiles ; Flower shower and faucet handles if possible. If you can not remove, cover well with plastic bag.
Protect the surrounding area with masking tape; be especially careful with the tub and protects the surrounding walls and recessed soap dishes.
Primero.Esto skirts is painting the edges where the tiles meet the wall and ceiling. Do also around appliances and not get any where with hand roller. It borders with the primer if you’re using borders and at least two coats of paint.
Spray the tiles with the can of spray paint or spray gun. Practice spraying a piece of cardboard first. The secret is to start spraying paint an inch or 2 (2.5 to 5 cm) before it hits the tile , and finish spraying an inch or 2 (2.5 to 5 cm) beyond the tile . Paint with gentle movements, using several light coats; not paint too much or the paint will run.
Use a disposable foam roller if you’re painting by hand. The foam tends to leave very few marks and a roll is better than a brush. The strokes can be checked if you are using a brush, either foam or natural bristle.
Follow the manufacturer’s instructions for drying time between coats. When you have finished painting, do not use the shower or tub for at least 48 hours, depending on the humidity in your house.