Adding a stick to rustic curtains
The curtains designed rustic elegance combine valances and curtain combinations with the simplicity and appeal of gingham fabric and rustic shade. To make a rustic curtain design, it is necessary to have separate clubs for each layer of curtains installed. In general, this means two rods per window . While you can install two separate curtain rods, this requires proper alignment and additional drilling. Instead, there are adaptations that provide shade and support with enough room for two curtain poles.
Place the first piece of curtain bracket and mark the screw holes on the wall with a pencil. The support should be closest to the window real as possible, with no more than a 6-inch (15 cm) between the window and the workpiece. This ensures that the curtain pole anchored off the wood support window .
Place the other piece of the support and verify that it is flush with the other party with a long level on top of the piece. Once bubbles focus levels, make the holes for the screws.
Drill pilot holes in the screw holes that are marked with a drill bit that is slightly smaller than the actual screw.
Place the brackets and screw the pieces.
Spend one piece through the top corner of the curtain and set the bar on the support piece. Repeat with valance, valance rod placed in front of the curtain pole.